Customer Can not Hear the Agent
In case you are facing an issue where the customer can not hear you while using Sanas, follow the below steps to do basic troubleshooting checks
Follow the Sanas Application Basic Checks article to confirm that all Sanas application settings are correct.
- If the issue remains, continue with the next troubleshooting steps.
Check the system settings
- Confirm if the headphone is connected to the system correctly
- Open sound settings - go to advanced sound settings (more sound settings)
- Click on Sanas microphone
- Click on Levels and confirm that the speaker icon highlighted below is not mute.
- Click on the Listen tab in the window, check the Listen to this device check box, and click Apply.
- Speak into the microphone and confirm if you can hear your Sanas Synthesized voice.
- If you can hear your Sanas synthesized voice, uncheck the "Listen to this device" check box and click apply.
- Confirm that the audio meter shows movement (the green color bar) when you speak into the headphones' mic as shown in the image below.
- Confirm that Sanas Mic is correctly selected in the dialer audio settings.
- Make sure that the System/Dialer output device is NOT set to Sanas Speaker.
- If all of the above steps are found to be correct, relaunch the application and test again.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article