Sanas with App-Based Dialer - Generic Configuration

Using Sanas with an App-Based Dialer: Configuration Guide

To integrate Sanas with an App-based dialer, you'll typically need to configure your dialer's audio settings to utilize the Sanas Virtual Microphone as the primary microphone input device. The specific steps for configuring microphone settings may vary based on the dialer platform you're using. However, the following general guidelines can help you through the process:

1. Launch Your Desktop App-Based Dialer: Open the desktop application-based dialer that you intend to use alongside Sanas.
2. Access Audio Settings: Navigate to the audio settings within the desktop app-based dialer. These settings are typically found within the application's preferences or settings menu.
3. Find Microphone Settings: Look for the microphone selection or input device options within the audio settings menu.
4. Choose Sanas Virtual Microphone: From the list of available microphones, select "Sanas Virtual Microphone" as your preferred microphone input device. This option should be listed if you have successfully installed and set up the Sanas Virtual Microphone software.
5. Save Changes: Once you've selected "Sanas Virtual Microphone" as the preferred input device, save or apply the changes within the dialer's audio settings. This ensures that the dialer utilizes the Sanas Virtual Microphone for audio input during calls.

'